How To Make Wine

How To Make Wine

Ready to channel your inner winemaker? You’re in luck! Our simple seven-step wine making guide will show you exactly how you can make wine at home. For more details, images of the fruit wine making process and a list of ingredients available to you, scroll down to the bottom of the page below the infographic.

Looking for an easy way to start making wine from fruit? Buying Our Fruit Wine Making Kit is a great way to start! It has everything you need to start your wine making career! Below is our very own 7 Wine Making Steps:

How To Make Wine Infographic

 

The 7 Easy Steps To Making Wine

  1. Preparing Winemaking FruitPrepare the wine making produce by cutting up larger fruit, busting skins on smaller fruit, chopping up fruits such as raisins, and bruising any produce like ginger root, etc. Also, any large pits should be removed. It is also important to understand that you can over-process the produce. Food processors, blenders and such should not be used for this purpose. Doing so will cause too much bitterness from the skin and seeds of the produce to be incorporated into the resulting wine.

  2. Adding Sugar To The Wine MustStir together all of the wine making ingredients called for, EXCEPT for the Wine Yeast, into a primary fermenter. For a list of basic wine making recipes go to our home wine making recipes page. Collect any pulp in a fermentation bag and submerge the bag into the wine making mixture. Add water to equal the batch to 5 gallons. Then add 5 Campden Tablets. They should be crushed up before adding. Do not add the wine yeast at this point in the process. Adding the wine yeast at the same time you add the Campden Tablets will only result in destroying the yeast.

  3. Wine Ferment With Towel Covering ItCover the fermenter with a thin, clean towel and wait 24 hours. During this waiting period the Campden Tablets are sterilizing the juice with a mild sulfur gas. During the 24 hours the gas leaves the container making it safe to add the wine yeast.

     

  4. Wine Yeast Sprinkled Over Wine MustSprinkle the wine yeast over the surface of the juice and then cover with a thin, clean towel. Allow this mixture (must) to ferment for 5 to 7 days. You should start to see some foaming activity within 24 hours of adding the wine yeast. Typically, 70% of the fermentation activity will occur during this 5 to 7 day period.

     

  5. Removing Pulp In Fermentation BagAfter 5 to 7 days remove the pulp from the fermenter and discard. Siphon the wine into a carboy in a careful manner, so as to leave the sediment behind. You can easily remove the pulp by lifting out the fermentation bag. Wring out any excess juice from the bag. Siphon the wine off the sediment without stirring it up. Get as much liquid as you can, even if some of the sediment comes with it. If necessary, add water back to 5 gallons.

     

  6. Carboy Fermenter With AirlockAttach a wine airlock and fill it approximately half-way with water. Allow the juice to ferment for an additional 4-6 week period or until it becomes completely clear. You may want to verify with your wine hydrometer that the fermentation has completed before continuing on to step 7. The wine hydrometer should read between 0.990 and 0.998 on the Specific Gravity scale. Be sure to give the wine plenty of time to clear up before bottling.

  7. Bottling Wine From FermenterOnce the wine has cleared completely, siphon it off of the sediment again. Stir in 5 Campden Tables that have been crushed and then bottle. When siphoning off the sediment, unlike the first time you siphoned the wine, you want to leave all of the sediment behind, even if you lose a little wine.

     

sources

http://www.eckraus.com/wine-making-steps


Italianbooze

Leave a Reply